To Conduct this Test, I…
- Picked 3 renowned guitar leads from different brands and price-points
- Ensured that all cables were of the same length, to keep the test fair.
- Used each cable through a clean and distorted amp (Victory V40 and Blackstar HT100 respectively).
- Played the same guitar and riffs, to keep the test fair and make the comparisons easier.
- Picked winners for each test, based on their tonal qualities.
An absolute essential, the classic ¼ inch jack-to-jack guitar lead is the key component that connects your guitar to its sound source – an amplifier. But like with most musical equipment, the amount of choice out there when it comes to guitar leads is quite overwhelming. Especially for what is such a simple piece of gear!
The number of guitar lead options available is vast, with a raft of companies manufacturing their own. Available in different lengths, the core design elements of guitar leads are more or less the same from brand-to-brand. So why are there still so many different versions out there?
Ranging from cheap and cheerful guitar leads under £10 to premium high-end cables exceeding £30, it can be difficult to understand why some cost considerably more than others. So in this next section, we’re going to investigate a few potential reasons.
What Does a More Expensive Guitar Lead Offer?
The main selling-point that companies convey to market their pricier cables is the superior sound quality that they offer. Stating that they supposedly ‘sound better’ or ‘more transparent’, most will assume that an expensive cable delivers a purer tone. In essence, a good cable won’t colour your sound or neuter any frequencies in your signal.
Whilst that may be true, there isn’t really much solid evidence for that. By using more luxury materials and components, such as gold-shielding and thicker insulation, it’s believable that a higher quality cable will provide better longevity. Some will also say that a premium guitar lead will therefore be quieter, whereas a poorly-insulated cheap cables will introduce noise.
But ultimately, will these high-end design elements improve your sound all that much? If not, why justify spending so much more money on a ‘better’ cable if the tonal benefits are hardly noticeable? Well, the aim of this article is to find out!
Hypothesis: An Expensive Guitar Cable Sounds Better Than a Cheap Cable
In this article, I’m going to compare three cables from different brands that cover contrasting price-points. The aim of this investigation is to find out which cable sounds the best, not to discover which is the most well-made. Of course, I will still detail their specifications, as their build quality could contribute to how they sound. And indeed, this may affect your overall decision-making or final verdict.
The Three Contenders
Stagg SGC6 6m Guitar Lead – £6.99
The cheapest of the three is a simple no-frills Stagg SGC6 6m guitar lead, which you can get for less than £10. With a basic design, this cable is aimed at the player who just wants to plug in and play on a budget.
With metal casing on each end, the key soldering points are well-protected to ensure robust operation. The cable itself is quite flimsy however, and feels like it could be easily severed or damaged if trodden on.
Whirlwind Standard Leader Jack-to-Jack 18.5ft Guitar Lead – £20.99
The second contender, covering the mid-priced bracket, is a Whirlwind Standard Jack-to-Jack 18.5ft guitar lead. Notorious for their robust design, Whirlwind’s Leader series cables feature a patented grip. This essentially absorbs any strain that can typically occur around the connectors, reducing the chance of malfunction.
In terms of build quality and longevity, Whirlwind cables are greatly admired, and considered an industry standard amongst their counterparts. Unlike the Stagg SGC6, the Whirlwind cable has a less flimsy feel, giving more reassurance to the user.
Ernie Ball Ultraflex 20 ft Guitar Lead – £29.95
The most expensive guitar lead in this test is an Ernie Ball Ultraflex 20ft cable. Ernie Ball believe that their cable can “transmit a clean transparent signal that is superbly quiet, while accurately and faithfully delivering all the frequencies your instrument produces.”
That’s a bold statement, which meets the criteria of what I believed to be an exemplary cable. We’ll soon find out if that is indeed the case!
The Ernie Ball guitar lead’s 99.99% oxygen-free copper connectors are dual-shielded for excellent durability, with the dual conductor design ensuring low noise. Ultimately built to deliver the purest sound without distortion or interference, the shell casing is also more durable than most. This makes it another sturdy and tour-worthy option.
How Will These Guitar Leads Be Tested?
To make sure that the test between all three guitar leads is fair, I have determined the variables and non-variables. If you’re unaware of what these terms means, the variables are the changeable aspects of the test – the guitar leads. The non-variables are the consistent aspects of the investigation that determine a balanced, level investigation.
The most noteworthy consistency between the three leads is their length, all of which are around 20 feet (6 metres) long. This is important, as a longer cable generally takes away top-end presence from your signal, lessening the tonal clarity emitted by your amp.
This is why many guitarists use buffer pedals to counteract this issue, lowering the capacitance to retain that precious high-end. So if I used cables with contrasting lengths, the test would therefore be unfair. As by that logic, a shorter cable will give a brighter and superior tone.
Variables:
- Stagg SGC6 6m Guitar Lead
- Whirlwind Standard Leader Jack-to-Jack 18.5ft Guitar Cable
- Ernie Ball Ultraflex 20 ft Guitar Cable
Non-variables:
- Cable Length – all are around 20ft long (approx. 6 metres)
- Amplifiers – Victory V40D Duchess Deluxe Head and Blackstar HT Stage 100H MKII Head
- Cabinet – Victory V212-VC w/ Celestion Creambacks
- Cabinet Mics – Shure SM57 and SM7B
- Guitar – ‘98 Fender American Deluxe Stratocaster w/ Lace Sensor Pickups
- Guitar Strings – D’addario NYXL 11-48
- Audio Interface – Universal Audio Apollo Twin MKII Duo Heritage Edition Thunderbolt
- iMac
- Logic Pro X
Method
Step 1: The Setup
This investigation will be conducted by playing my Fender Stratocaster guitar into a Victory V40D Duchess for cleans, and a Blackstar HT Stage 100H MKII for distorted tones. No pedals will run between the guitar and the amps, so that the signal between them is uninterrupted for the purest results. This means that their differences will be as discernible as possible, if indeed there are any.
My guitar has been freshly restrung with a set of D’Addario NYXL 11-48s, to ensure that the full tonal idiosyncrasies can be heard through the cables.
Step 2: Recording
In order to hear and determine the differences between the cables, I will record short excerpts using each one. These clips will be of the same riff in each case, so that they can be compared directly against one another.
To capture the audio in these tests, I have mic’d a Victory V212-VC cabinet with a pair of Shure microphones – the classic SM57 and the SM7B. This is being recorded through a Universal Audio Apollo Twin MKII Duo Thunderbolt, a highly-regarded audio interface with studio-quality preamps.
Using an iMac that is running Logic Pro X, I will not perform any post-processing to manipulate the recorded audio. This is so that the investigation is kept fair.
Step 3: Analysing
I’ll identify the best guitar lead of the three as the one that gives the best sound (which is subjective) for that particular tone, and that has audibly produced the widest frequency range. The excerpts with the highest amount of top-end frequencies coming through will also be a key indicator in determining the best.
But that’s not all, as the distorted excerpts will also produce some background hiss. Although my Fender Strat is fitted with low-noise Lace Sensor pickups, I will not be using a noise gate pedal to filter out any excess hiss. It’s predictable that all three cables will let some noise through, however the one that produces the least will indicate that it is the best-insulated of the contenders.
Test 1: Clean Tone
Signal Chain: Fender Strat > Guitar Lead > Victory V40D Duchess Head > Victory V212-VC > Shure SM57 & SM7B > Universal Audio Apollo Twin MKII Duo Thunderbolt > iMac > Logic Pro X
This test I believe will give the most noticeable indication of the best cable. With a crystal clean sound, there is no break up or overdrive that could potentially negate the sound contrasts between them.
You may be thinking: “Why not just plug straight into an audio interface?”. Whilst it was tempting to conduct a DI test, with a preamp introduced, it could potentially exacerbate their sound differences even more. There’s also the fact that most guitar players dislike recording this way, preferring to play through a mic’d amplifier.
Let’s find out if there are any tonal differences between these cables: