Click here to read more about choosing the right PA system. If you want to read more PA systems, check out our Ultimate Guide for the full lowdown. Thanks for reading!
The terms ‘active’ and ‘passive’ essentially mean powered and non-powered, respectively. Active devices are powered internally, while passive devices require external power to function – this exact principle applies to PA speakers too.
When it comes to PA systems, however, there are bigger implications to consider. As mentioned, active speakers power themselves, meaning they can be easily set up and used. Passive PA speakers require external power, meaning extra components. So when and why would you need passive speakers? Let’s take a closer look…
Because active PA speakers have power built-in, they’re super easy to get up and running. They can be set up and making noise in minutes – all you need is a plug point.
As well as having built-in power, many active speakers have built-in controls and additional connectivity. This includes volume, EQ, auxiliary and even wireless functionality, in some cases. With this in mind, they can often be used as single speakers. This makes them great for busking, dance and yoga classes, small-scale public speaking and other similar scenarios.
A popular active PA speaker setup is two speakers and a simple mixer. This allows you to use the speakers in stereo, offering a broader sound with enough control to suit the space you’re in. Because of the built-in power and features, this type of system is super-easy to set up – no experience required.
These systems also tend to be more affordable, making them great entry-level options. Active PA speakers are great for beginners, bands, duos and DJs looking to have their own self-sufficient setup.
(above: a Yamaha active PA speaker that can be placed at an angle – great for on-stage monitoring or busking)
As you may have guessed by now, passive PA speakers are the opposite. They have no internal amplifier, instead requiring power from elsewhere. This usually comes from a power amplifier or powered mixer.
This means more hardware is needed. However, the fact that the amplifier and speaker components are separated is often seen as a plus for a number of reasons. First of all, the speaker without the amplifier is a lot lighter, making it easy to transport, set up and pack down.
Secondly, if one component goes wrong, you don’t need to take your whole system out of action to repair it. Finally, systems that use passive speakers can be easily expanded. Many power amps have multiple channels, so you can connect more than 1 or 2 speakers at a time. If you upgrade your venue size or need more projection, simply add more passive speakers!
Most medium to large-size venues use passive PA speakers (above: passive line array speakers are a common sight at concert venues). They often remain stationary on stage or built-in to the space, powered by a number of amps and controlled by a stationary mixer. These versatile PA systems are easy to upgrade, sound great and are less susceptible to faults.
A power amplifier, as the name suggests, is the component that powers your speakers. Without power, the speakers are just sad, silent cones. In the most basic terms, a power amplifier takes an electronic audio signal (input) and boosts it to a level that can power a speaker (output). The input could be anything from a microphone to the signal from an electric guitar. Either way, the power amp is what drives it to the correct level to be heard through the speaker.
Active PA speakers have a power amplifier built-in to them, while passive ones need an external power amp or power from a mixer. Your speakers have to match your power amplifier in terms of power rating (wattage) and impedance (ohms) to ensure that they a) sound great, and b) operate safely.
The general rule of thumb is that you need to be able to provide around double the handling power of your chosen speaker. So for example, if you have an 8-ohm speaker with a program power rating of 350 watts, you’ll need an amplifier that can pump out 700 watts at 8-ohms.
This may sound counter-intuitive, but it’s aimed at preventing distortion of your signal. If an amplifier can produce double the amount of power required, the signal will be able to reach a far higher volume without clipping, because the amp guarantees plenty of headroom.
This depends entirely on your setup. As we’ve already discussed, active and passive PA speakers each have their fair share of pros and cons. So which speakers are best for you? Consider a few common scenarios, as follows:
Click here to read more about choosing the right PA system. If you want to read more PA systems, check out our Ultimate Guide for the full lowdown. Thanks for reading!
Whenever Strymon releases something new, everyone at Andertons instantly stops whatever they're doing and immediately starts patching cables and flicking…
Looking for a silent practice tool with a small footprint? Then you might want to consider using one of the…
Ed Sheeran is a multi-platinum award-winning artist who’s famously known for being a one-man band on stage. And many people…
The desktop guitar amp market is getting more popular, but with many companies now creating their own ranges to enter this…
The Fender Vintera II electric guitars are now released! You may be wondering what is so special about these guitars, and how…
A new year, a new beginning, a new piano? But which one should you pick and how can you tell?…