More information about guitars and humidity
Water can be a useful thing. Drinking is good. So is washing. Surfing’s not far behind either. Flooding on the other hand isn’t so good. Neither is sinking (generally). Water has its pros and cons, and that’s true for what it does to guitars too. Of course, you’re never going to give your guitar a shower (right?), but you have to appreciate that water does make up a fair bit of the air we breathe, and it can and does have an effect on the woods that guitars are made from.
Because you can’t see humidity, and often don’t even realize what it’s doing to your prized acoustic until it’s too late, it helps to be able to measure it with something known as a Hygrometer (sometimes called a Humidity Monitor).
A hygrometer measures the amount of moisture in the air compared to the amount of moisture air can hold before it actually becomes water (Relative Humility, or RH). We don’t need to go too far into the realms of science here but there are some basic principles:
- Cold air won’t carry as much moisture as hot air, so when air temperature rises, so does its ability to hold more moisture.
- The way we heat our homes reduces the moisture content of the air. Essentially, we dry it out because we aren’t adding an additional source of moisture as it heats.
So if you, or more importantly your guitar, lives in a particularly cold house that needs a lot of heating, or in a particularly hot and dry area, then you need to be aware that the RH level will be low, and you might need to take steps to protect your guitar from what is usually referred to as ‘Low Humidity Damage’. This is particularly true if your guitar is a high-end model. Although this may seem a little unfair, the cheaper models tend to be more resistant to changes in RH because they’re more solidly constructed. The fine sound and playability that comes with a more expensive guitar is largely due to the delicacy of the materials and the manner of construction that holds them together. Cheaper guitars may use plywood, but this is much less likely to crack than the solid wood. So, not only do you want to protect your expensive guitars because of their value, they’re the guitars that actually need the most protection anyway!
Where does your guitar live?
So what’s a good Relative Humidity reading for your guitars? First, you need to think about whether we keep the guitar in a case, or just out and about on a stand or the wall. You’ll want to monitor and (if needs be) control the relative humidity of the air that the guitar lives in. It’s generally a good idea to keep the guitar in a case if you can bear not having it on show because a case will protect the guitar from rapid changes in RH, and that sort of rapid change is a particularly bad idea. However, if it’s more convenient (or you simply can’t stand not) to have the guitar permanently out and about in your home or studio, you need to think about having a hygrometer that monitors the RH of the room it frequents. Once you’ve figured that one out, you need to look at getting the RH right.
Quick changes in humidity (you really want to avoid this…)
It’s wise to avoid rapid RH changes, and this is where keeping the guitar in a case tends be a good idea. When you’re going on a tour your guitar could be exposed to RH of 60% to 30% within a couple of days. It isn’t going to like that very much. It’s much wiser to try and control that variation in RH gradually between those levels of humidity and a humidifier can be much more effective when it’s controlling the levels inside the relative safety of a case so that the guitar can gradually acclimatise. More on that in a bit.
Good news for vintage guitars
It’s a good idea to let your younger guitars stabilize as much as possible: it’s in the first few years of a guitars life that it is most susceptible to RH changes. Like us humans, the older they get, the more resistant they are to change! You may have noticed that older ‘vintage’ acoustics tend to weather RH changes much better than the younger whipper-snappers about. If you can, try and get your guitar as stable as possible before subjecting it to too many changes in RH. It’s a good excuse for you to buy another ‘vintage’ guitar if nothing else!
What if the guitar was built in a high/low humidity area?
45% to 50% is generally the rule, but it does depend to a certain extent on where the guitar is manufactured and the RH that the wood involved has become acclimatized to. A responsible manufacturer will build guitars in a controlled environment to avoid the guitar suffering when it finds a home with a significantly different RH. For example, if your guitar was built in a workshop with a RH level of about 65%, that guitar is likely to crack with a typical RH of more like 35%. However, the other way round is less of an issue. So if your guitar is built in a workshop with a 35% RH level, it is unlikely to crack when it lives in a 65% RH environment. The action may rise but it is unlikely to crack.
What does all this mean?
In short, if you don’t monitor the environments that your guitars live in and we end up subjecting them to RH levels that harm them, they won’t like it and the quality of the construction will soon start to disappear. This in turn will effect the guitars playability and tone, and ultimately your sanity. Some folks claim that their guitar is not of the quality it purports to be when actually the guitar itself is just having to survive a warped form of water torture! As already noted, RH levels may not be that big an issue for you and your guitar where you enjoy each others company, but it’s wise to consider whether it might be. The safest and most sensible way to keep an eye on this is to purchase a humidity monitor that will let you know if you need to take action to protect your investment.
If you have made a considerable investment in an acoustic guitar, it makes good sense to invest in a humidifier like this so that you can rest easy that the guitar is properly looked after when it’s sleeping. Not only will it help ensure that the guitar doesn’t crack or warp, but it will also ensure that it remains as playable as the day it was made.
Further Reading
Taylor have made 3 very good PDFs that cover humidity issues. Click on any of the links below for more info.