On a basic level, you can simply use a fresh microfibre cloth and clean the surface – removing any dust, dirt, moisture or fingerprints as you go. Anything more severe and caked on can either be removed with a bit of warm water and soap (as long as you dry it off after) or a cymbal cleaner (which you can find out more about below). You should make sure that you pay attention to the cymbals edges too; splinters from your sticks can sometimes mark and stick to this area if you’re a hard-hitter.
If you want to prevent these minor blemishes on your cymbals, you can always store them away in a cymbal bag when not in use. This defends against potential metal-on-metal scratching from occurring. Also, when you carry them or take them off a stand, only handle the edges of the cymbal, as this will prevent fingerprints from covering the rest of the surface. Some drummers will even clean their cymbals (in a basic manner) after each session – but that can be a tad excessive!
How do you Polish a Cymbal?
Cymbals shouldn’t be polished every single time you decide to clean them. You should only be polishing them every so often. In many polishing formulas, the abrasives that are present can remove certain layers if it’s used too much. This can sometimes go as deep as the lathing, which will be detrimental to the sound of your cymbal. Many brands have now produced their own versions, meaning there are plenty of options available out there.
You’ll want to use one of these branded cymbal polishes. Add a small amount of polish to a soft microfibre cloth. This cloth should then be rubbed over and into the cymbals grooves, ensuring that you don’t miss any of the surface area. Once this is done, you can either get rid of the excess polish with another microfibre cloth (that’s ideally clean and dry), or by running the cymbal under water that’s warm – drying it off completely once you’re done, with all of the polish taken off. If you’re using water, ensure that you’re gently rinsing and aren’t soaking/submerging the cymbal in a bucket.
You can then repeat this process again on the cymbals underside if you prefer a complete and in-depth polishing process. Remember though: any leftover moisture on either side can damage the metal alloy itself. Moisture and metal are really not a good mix.
What’s the Best Cymbal Cleaner?
The main cymbal cleaner(s) that we stock comes from a brand called Groove Juice. They’ve carved a solid niche in this space, becoming the go-to choice of many drummers when it comes to keeping their cymbals in working order. This is because it’s so quick and easy to use. There’s a reason why it’s maintained its place on the market for over 10 years now! Their Groove Juice Cymbal Cleaner was developed to be used on premium, professional bronze cymbals, while the Groove Juice Junior Cymbal Cleaner is formulated for use on entry-level and budget cymbals.
Groove Juice Cymbal Cleaner is incredibly simple to use; just spray it onto the surface of your cymbal and wipe the mixture (using either a paper towel or a soft cloth) over the tonal grooves. The fluid should be evenly distributed and then left on the cymbal for between 30 seconds and a minute. It can then be rinsed off using warm water – which should remove any remaining residue. If there is a serious amount of detritus on your cymbal, you may want to consider using an old toothbrush to really get into the crevices. However, never use a wire brush as it can scratch and remove your cymbals surface. You should then use a towel to dry off the cymbal and get rid of any left over moisture. If done correctly, your cymbal should now be free from smudges and dirt, with a restored shine and sheen too.
Can Any Cymbal Cleaner & Polish be Used on Any Kind of Cymbal?
It’s always worth reading the description of any cymbal cleaner or polish. Some will state that it should only be used on cymbals with a brilliant finish for example (and should not be used on any with a traditional, patina or natural finish). This is the case for a product like the Zildjian cymbal polish. Ultimately, you should always use the correct polish/cleaner for the specific recommended kind of cymbal.