We hope you enjoyed exploring with us. Want to learn more? Check out some more interesting content right here.
Before we tackle the burning question of guitar or amp, it’d be good to get the bottom of what affects a guitar’s sound. How do you get great tone? And subsequently, how important is the guitar in finding your perfect sound?
Now there’s a divisive question. To start things off, yes – wood does affect your guitar sound. That’s apparent when you compare a Fender Tele to a Gibson Les Paul. Ash and Alder sounds more mid-focused and spanky, while Mahogany is warm and full of sustain.
Then there’s the neck and fretboard wood. Again, a maple neck is going to have a snappier sound than a Mahogany neck. A Rosewood fretboard will sound warm with plenty of attack, compared to the neutral, balanced tone of Richlite for example. Consider your preferred musical style, and this will influence your choice of tonewood.
If you’re a hard rock or metal player, you might want an accentuated low end with a tight attack. Mahogany body and an Ebony fretboard would do the trick. Blues or country? Alder body with a Maple neck. It’s that simple!
(below) The Chapman ML1 Pro Traditional uses an Ash body, known for a balanced tone with slightly scooped mids. It also looks pretty darn cool!
Want to know more about Electric Guitar Tonewood? Read our article on it here.
The tone of a guitar is a team effort. Woods, strings, hardware – and of course, pickups. Pickups detect the vibrations of your guitar strings and convert them into an electrical signal for amplification.
This essentially makes pickups the bridge between your instrument and the amplifier. With this in mind, they could be considered pretty important. That’s why there are so many different varieties on the market. From different types like single coil, humbucker and P90 to specific models like EMG 81s, Seymour Duncan Hot Rails, Lace Sensor Reds and many more.
These varieties each offer something different. A Mahogany guitar with a single coil in it will sound drastically different than a Mahogany guitar with a pair of EMGs. We’d go so far as to say that pickups make a pretty big difference! For more info on electric guitar pickups, check out our Ultimate Guide here.
There are a number of things that you can do to make sure your guitar is sounding top notch – no matter how much it costs.
(below) taking time to setup your guitar makes a big difference to its sound – and to the way it feels. Check out our repairs and service page for more info!
It’s all very well and good considering the make-up of a guitar, but the player is half the battle. Jimi Hendrix’s Strat probably wouldn’t have sounded like it did without Jimi himself at the helm.
Your technique and approach to playing will make a huge difference to the sound of your guitar. A Strat sounds just as good with Mark Knopfler playing it as it does with Eric Johnson. The point being that you have the ability to influence the sound of your guitar, just as it much as it has influence over you. Want to use single-coils for metal? Fancy using a hollow-body for punk rock? Own it! But make sure you do your research first…
It’s not all about how it sounds. Though not everyone will admit it, we all care about how our guitar looks – some people perhaps a little too much. In most cases, you’ll see a guitar before you hear it, so it’s got to look the part. Ask yourself this: would you buy a pretty guitar that sounds bad or an ugly guitar that sounds great? Food for thought.
Then there’s the way the guitar feels. This is often a real deal-breaker for players. Your guitar is your instrument, your tool of creative expression. You need to feel comfortable with it. It needs to respond to you and it needs to allow you to realise your musical ideas – with this in mind, you have to feel totally at home with it.
We’d absolutely always recommend trying guitars before you buy, if possible. Nothing compares to feeling the thing in your own hands – most players know very quickly whether or not they’ll get on with a guitar. At Andertons Music Co, we’ve got a number of sound-proofed demo rooms and playing areas for this exact purpose.
If you don’t have a chance to explore the feel of a guitar, you could make an estimated guess. Mahogany bodies tend to be heavier, satin finished necks are often easier to play, thinner neck profiles are faster still – and so on!
We’ve explored the things to consider when shopping for a guitar. So how about amps? Let’s dig a little deeper to see if we can answer our question.
One of the most common things you’ll come across when looking at amps is the pros and cons of valve amps vs. solid state amps. Valve amps are powered and amplified using vacuum vales (or ‘tubes’), while solid state amps use electronics (transistors and similar components) to make noise.
Many guitarists swear by valve amps. Vacuum valves produce a warm, dynamic tone that handles volume extremely well. By comparison, solid state amps aim to reproduce similar tones, but many musicians can easily tell the difference. If you crank a distorted valve amp alongside a distorted solid state amp, you can generally hear a difference in clarity and warmth – though this is subjective and depends on the amps in question.
So are valve amps better than solid state amps? While valve amps arguably produce a richer sound, they tend to be more expensive. Not only that, but vacuum valves are generally considered to be a little more fragile – they need to be looked after! Valves will degenerate in terms of sound quality the older they get, while solid state amps remain consistent. If you’re looking to play at high volume and you make the most of dynamics in your tone, valves are always a good choice. But for practice and home use, solid state amps get the job done, and tend to be a bit cheaper.
A guitar amp stack consists of at least two components: a head and a speaker cabinet. You can always add more cabinets to this sort of setup if you feel like making more noise or looking like more of a rockstar.
A combo, as the name suggests, combines both of these components into a single unit. Combos provide you with both consistent tone and volume without the need for any external speakers. On the flipside, stacks are more versatile in that they can be chopped and change to find your own sound. This is also comes in handy when gigging – you can easily show up to a gig with an amp head and use a shared backline.
You can find out more about amp combos and stacks here.
To this, we can safely say yes. Different speaker sizes, materials and configurations can have a huge effect on tone. If you listen to a preamp or distortion pedal without a cabinet, it often leaves a lot to be desired.
If you’d like to know more about the different types of guitar cabinets on the market, check out our article here!
This depends on a number of things. First of all, valve amps tend to sound a little hotter and more responsive at loud volumes because the valves are pushed to operate at a higher temperature. This is essentially the cause of natural overdrive, as your signal starts to break up and distort in an organic way. Many guitarists consider a cranked, overdriven valve amp to be something of a tonal holy grail.
Then there’s an amplifier’s power rating, or wattage. This determines the amp’s capacity to handle volume; the higher the rating, the higher the volume can go without sounding rubbish. That’s why low wattage solid state amps tend to sound a little flat at high volumes. Higher wattage amps tend to cost more because they can handle more – making them better for gigging or recording at high volume.
So we’ve established what to look out for in a guitar and an amp. We’ve boldly gone where no guitarist has gone before – well, not quite, but we like being thorough.
There’s an awful lot that makes a difference to the tone of your guitar and amp. But more importantly, different components in your rig have varying effects on your tone, and furthermore, on your playing experience.
Many will say that a bad guitar into a great amp might just sound nice, while a great guitar into a bad amp probably won’t. But you’ve missed a number of crucial details. How does the guitar feel? How does your rig look? Will you be gigging or practicing, or both? What sort of style do you play? Each of these questions emphasises the importance of your guitar and amp in different ways. Without your amp, your guitar is nothing. Without your guitar, your amp is nothing. In summary, consider these points when making your choice:
So what matters most to you? This will help point you in the right direction. Your amp is crucial to your musical style and the volume you’ll be playing at, while your guitar has a direct effect on your playing experience and tone. There’s no right or wrong answer!
A final thought: here’s Chappers and the Captain with their take on the question:
We hope you enjoyed exploring with us. Want to learn more? Check out some more interesting content right here.
Whenever Strymon releases something new, everyone at Andertons instantly stops whatever they're doing and immediately starts patching cables and flicking…
Looking for a silent practice tool with a small footprint? Then you might want to consider using one of the…
Ed Sheeran is a multi-platinum award-winning artist who’s famously known for being a one-man band on stage. And many people…
The desktop guitar amp market is getting more popular, but with many companies now creating their own ranges to enter this…
The Fender Vintera II electric guitars are now released! You may be wondering what is so special about these guitars, and how…
A new year, a new beginning, a new piano? But which one should you pick and how can you tell?…