Does An Expensive Guitar Lead Give You A Better Tone?

Here at Andertons Music Co. we get asked plenty of questions related to gear, and we do our utmost to provide the answers. After all, we know that musicians want to get their hands on the products that can let them sound their best, and one topic that is commonly debated is the importance of a decent guitar lead.

Elliot Stent

Elliot Stent

An absolute essential, the classic ¼ inch jack-to-jack guitar lead is the key component that connects your guitar to its sound source – an amplifier. But like with most musical equipment, the amount of choice out there when it comes to guitar leads is quite overwhelming. Especially for what is such a simple piece of gear!

Why Am I Asking This Question?

The number of guitar lead options available is vast, with a raft of companies manufacturing their own. Available in different lengths for certain applications, the core design elements of guitar leads are more or less the same from brand to brand. So why are there still so many different versions out there?

Ranging from cheap and cheerful, no-frills guitar leads under £10 to premium high-end cables exceeding £30, it can be difficult to understand why some cost considerably more than others. So in this next section, we’re going to investigate a few potential reasons…

What Do You Get From a More Expensive Guitar Lead?

The main selling-point that companies convey to market their pricier cables is the superior sound quality that they offer. Stating that they supposedly ‘sound better’ or ‘more transparent’, most will assume that an expensive cable delivers a purer tone. In essence, a good cable won’t colour your sound or neuter any frequencies in your signal.

Whilst that may be true, there isn’t really much solid evidence for that. By using more luxury materials and components, such as gold-shielding and thicker insulation, it’s believable that a higher quality cable will provide better longevity. Some will also say that a premium guitar lead will therefore be quieter, whereas a poorly-insulated cheap cables will introduce noise.

But ultimately, will these high-end design elements improve your sound all that much? If not, why justify spending so much more money on a ‘better’ cable if the tonal benefits are hardly noticeable? Well, the aim of this article is to find out!

Hypothesis: An Expensive Guitar Cable Sounds Better Than a Cheap Cable

In this article, I’m going to compare three cables from different brands that cover contrasting price-points. The aim of this investigation is to find out which cable sounds the best, rather than discover which is the most well-made.

Of course, I will still detail their full specifications, as their build quality could contribute to how they sound. And indeed, this may affect your overall decision-making or final verdict. Below, I have broken down the contenders.

The Three Contenders

  • SGC6
  • Andertons Pro Sound 6.3mm Jack to Jack Cable 6m
  • 6.9900
  • 172
  • Stagg
  • Brands
  • Stagg
  • Andertons Pro Sound Economy 6.3mm Jack to Jack Lead 6mA basic jack to jack instrument lead with metal plugs. 3m of cable. Suitable for connecting guitar equipment, keyboard equipment and other line level gear.Poor quality cables and fittings can seriously restrict your enjoyment of music and can, in some cases, actually be a risk to your hearting due to unwanted crackle and buzz. We have a wide range of rugged, great value cables and fittings in stock. Whatever your needs we have a part for you.
  • No Promotion
  • 4
  • 31
  • WWSL186
  • Whirlwind Standard Jack to Jack 18.5ft Guitar Cable
  • 26.9900
  • 21
  • Whirlwind
  • Bass Guitar Strings & Accessories
  • Guitar Cables
  • Whirlwind Standard Jack to Jack Length: 18.5ftTheres not a performer out there that doesnt bend, pinch, or tangle their cable. Thats why Whirlwind invented the Leader Series. Premium, rugged, and practically indestructable, the Leader plugs patented cable grip absorbs any typical straining in the field. And its flexible boot extension has virtually eliminated breakage at the cable exit. Combined with Accusonic+1cable, the Leader is the highest quality instrument cable manufactured today.
  • No Promotion
  • 4
  • 22

Stagg SGC6 6m Guitar Cable – £6.99

The cheapest of the three is a simple no-frills Stagg SGC6 6m guitar lead, which you can get for less than £10. With a basic design, this cable is aimed at the player who just wants to plug in and play on a budget.

With metal casing on each end, the key soldering points are well-protected to ensure robust operation. The cable itself is quite flimsy however, and feels like it could be easily severed or damaged if trodden on.

Whirlwind Standard Leader Jack-to-Jack 18.5ft Guitar Cable – £20.99

The second contender, covering the mid-priced bracket, is a Whirlwind Standard Jack-to-Jack 18.5ft lead. Notorious for their robust design, Whirlwind’s Leader series cables feature a patented grip. This essentially absorbs any strain that can typically occur around the connectors, reducing the chance of malfunction.

In terms of build quality and longevity, Whirlwind cables are greatly admired, and considered an industry standard amongst their counterparts. Unlike the Stagg SGC6, the Whirlwind cable has a less flimsy feel, giving more reassurance to the user.

Ernie Ball Ultraflex 20 ft Guitar Cable – £29.95

The most expensive guitar lead in this test is an Ernie Ball Ultraflex 20ft cable. Ernie Ball believe that their cable can “transmit a clean transparent signal that is superbly quiet, while accurately and faithfully delivering all the frequencies your instrument produces.”

That’s a bold statement, which meets the criteria of what I believed to be an exemplary cable, as I described in the introduction. We’ll soon find out if that is indeed the case!

The Ernie Ball lead’s 99.99% oxygen-free copper connectors are dual-shielded for excellent durability, with the dual conductor design ensuring low noise. Ultimately built to deliver the purest sound without distortion or interference, the shell casing is also more durable than most. This makes it another sturdy and tour-worthy option.

How Will These Guitar Leads Be Tested?

To make sure that the test between all three guitar leads is fair, I have determined the variables and non-variables. If you’re unaware of what these terms means, the variables are the changeable aspects of the test – the guitar leads. The non-variables are the consistent aspects of the investigation that determine a balanced, level investigation.

The most noteworthy consistency between the three leads is their length, all of which are around 20 feet (6 metres) long. This is important, as a longer cable generally takes away top-end presence from your signal, lessening the tonal clarity emitted by your amp.

This is why many guitarists use “buffered” pedals to counteract this issue, lowering the capacitance to retain that precious high-end. So if I used cables with contrasting lengths, the test would therefore be unfair. As by that logic, a shorter cable will give a brighter and superior tone.




Step 1: The Setup

This investigation will be conducted by playing my Fender Stratocaster guitar into a Victory V40D Duchess for cleans, and a Blackstar HT Stage 100H MKII for distorted tones. No pedals will run between the guitar and the amps, so that the signal between them is uninterrupted for the purest results. This means that their differences will be as discernible as possible, if indeed there are any.

My guitar has been freshly restrung with a set of D’Addario NYXL 11-48s, to ensure that the full tonal idiosyncrasies can be heard through the cables.

Cable Test Diagram, Stagg, Whirlwind and Ernie Ball

Step 2: Recording

In order to hear and determine the differences between the cables, I will record short excerpts using each one. These clips will be of the same riff in each case, so that they can be compared directly against one another.

To capture the audio in these tests, I have mic’d a Victory V212-VC cabinet with a pair of Shure microphones – the classic SM57 and the SM7B. This is being recorded through a Universal Audio Apollo Twin MKII Duo Thunderbolt, a highly-regarded audio interface with studio-quality preamps.

Using an iMac that is running Logic Pro X, I will not perform any post-processing to manipulate the recorded audio. This is so that the investigation is kept fair.

Step 3: Analysing

I’ll identify the best guitar lead of the three as the one that gives the best sound (which is subjective) for that particular tone, and that has audibly produced the widest frequency range. The excerpts with the highest amount of top-end frequencies coming through will also be a key indicator in determining the best.

But that’s not all, as the distorted excerpts will also produce some background hiss. Although my Fender Strat is fitted with low-noise Lace Sensor pickups, I will not be using a noise gate pedal to filter out any excess hiss. It’s predictable that all three cables will let some noise through, however the one that produces the least will indicate that it is the best-insulated of the contenders.

The Tests

Clean Test

Full Signal Chain: Fender Strat > Guitar Lead > Victory V40D Duchess Head > Victory V212-VC > Shure SM57 & SM7B > Universal Audio Apollo Twin MKII Duo Thunderbolt > iMac > Logic Pro X

This test I believe will give the most noticeable indication of the best cable. With a crystal clean sound, there is no break up or overdrive that could potentially negate the sound contrasts between them.

You may be thinking: “Why not just plug straight into an audio interface?”

Whilst it was tempting to conduct a DI test, with a preamp introduced, it could potentially exacerbate their sound differences even more. There’s also the fact that most guitar players dislike recording this way, preferring to play through a mic’d amplifier.

Let’s find out if there are any tonal differences between these cables:

Winner – Whirlwind Standard Leader

The Whirlwind cable had arguably the clearest sound of the three, with balanced lows, a strong mid-range and sweet highs, giving plenty of articulation. Whilst the Stagg was very similar tonally, it lacked just a little bit of top-end clarity compared to the mid-priced Whirlwind.

The Ernie Ball cable had great top-end sparkle, however it really lacked the warmth and punch of the other two, with noticeably scooped mids. Considering it’s the most expensive cable, its thin sound is fairly disappointing.

Distorted Test

Full Signal Chain: Fender Strat > Guitar Lead > Blackstar HT Stage 100H MKII > Victory V212-VC > Shure SM57 & SM7B > Universal Audio Apollo Twin MKII Duo Thunderbolt > iMac > Logic Pro X

This test is the one that I’m the most curious about, as with distortion I’d expect it to be harder to tell the differences between the cables. To avoid this, I will therefore play a riff that utilises tight palm-muted single notes, as well as open chords to give the best all-round impression.

This will hopefully make the comparison between them as discernible as possible:

Winner – Whirlwind Standard Leader

This was a close call, as the Whirlwind and Ernie Ball cables both sounded very good and quite alike. The Whirlwind lead edged it in my opinion however, as it had a slightly more crisp mid-range. This therefore gave plenty of bite and definition to the riff, lending itself particularly well to this type of tone.

The Ernie Ball cable did have marginally more presence, however the low-end had a shelved quality, delivering a thinner and more anaemic sound. Some may consider this more suited to a distorted tone, especially in a recorded mix where removing those frequencies is standard practice.

But of course, this is entirely subjective. The punchier mid-range offered by the Whirlwind may be something that other players prefer with a saturated-style distortion. Regarding the Stagg cable, this sounded muddier than its more expensive counterparts, taking it out of contention.

Noise Test

Although the aim of this investigation is to distinguish the best-sounding cable, I believe a noise test is worth including. This will ultimately show which cable is insulated and built the most competently, something that I’m sure many people would consider when purchasing a cable.

In order to conduct this test, I will plug each cable into the Blackstar HT100 MKII with a distorted tone:

Winner – Stagg SGC6

Again, a very hard test to evaluate, but to me it sounded like the Stagg was the quietest. Although its noise level was probably the same as the Ernie Ball cable in terms of volume, the Stagg had slightly less high-end hiss coming through. To the ear, this made it sound marginally quieter.

This could partly be attributed to the lack of top-end coming through the Stagg cable in general, something that was noticed and consistent in the playing tests. Despite this, I would still consider the Stagg the winner, which is surprising considering how affordable it is.

The Whirlwind was probably the noisiest of the three, but echoing what I said above, that could be because it had the strongest and most full-bodied signal. You could therefore perceive that it is letting more noise through, as across the frequency spectrum it was the most balanced-sounding.


Overall, I’ve been surprised by the results of this investigation. As it turned out, the Whirlwind Standard Leader cable, the mid-priced contender, was the best-sounding lead amongst the three. Sounding arguably the best in the clean test, and slightly fuller than the Ernie Ball lead in the distorted test, it is evident that it’s the clear winner.

Despite being perhaps the noisiest compared to the Stagg and Ernie Ball leads, the differences were very marginal. It’s not a deal-breaker if you’re interested in buying the Whirlwind, and sound-quality will always come first in my opinion.

Regarding the individual tests, contrary to what I believed, the distorted test displayed the most distinguishable differences. Even with lots of gain, the Blackstar didn’t neuter the tonal idiosyncrasies of the cables. Instead, it projected them more!

What do you think about the results of this test? Leave a comment and share your thoughts!

If you’re interested in finding the answers to some of the most notorious guitar myths around, check out more of our Labs articles by clicking here.

Elliot Stent
Elliot Stent
Elliot is a digital content specialist at Andertons, a guitarist and a YouTube gear demonstrator. Having studied Music and Music Technology, his interests lie equally in both performance and production. Favouring Fender instruments and Marshall amps, Elliot is also a pedal fanatic with a large collection of effects.

Responses & Questions